After filling the ink tanks in your PIXMA G Series printer when setting it up for the first time, the printer's power lamp will flash twice when it is powered on. Press the STOP button until the POWER lamp flashes again, and then release the button. The printer will begin to initialize. Please note that initialization takes about 6 minutes. Lights green after flashing when the power is turned on. Note. ON and Alarm lamps You can check the status of the machine by the ON and Alarm lamps. - ON lamp is off: The power is off. - ON lamp lights green: The machine is ready to print. Light flashes orange 10 times -IP4820 Article ID: ART135236 | Date published: 05/13/2015 | Date last updated: 07/05/2019 . For support and service options, sign into (or create) your Canon Account from the link below. My Canon Account Rate this Article. Was this article helpful? Yes, This document is helpful Red Light Blinking Error Canon G2000,G2010,G2002 Solve | Canon Pixma Hard Reset Welcome_To_____••••••••••••••••••••••× You can also perform a cleaning right from the printer operations panel, and I have included full instructions HERE . When printing PDF in color, the black color may not be a true black, but rather a combination of the color inks. Printing in Black rather than color should resolve the issue. obnyUk.

canon g2000 blinking 15 times